Network Engineer (IT Boot Camp) From Zero To Hero. (WAN) from Udemy

About This Class ( My Entire Course is 100% HANDS ON)

Do You want to Land an IT Job as A Network Engineer In Terms Of Managing/Configuring Cisco Routers and Switches using The CLI as You Actually worked in The IT Field

Why This Class

This One Day Course Will be the same as You worked as a Network Engineer For a Company For at least 2 Years that You can put on your resume because you will actually see every section in action with labs only as you did it in a real environment. (Boot Camp Class Full Day) . If you do the 18 Hour Lab that is in this class i can assure you it will be equivalent to a 2 year experience in the Field.

What Will You Gain From This Class

This course will enhance your skills in better understating by actually doing it as we were in the same classroom utilizing The CLI Using Cisco Packet Tracer.

In This Course you will not just learn you will actually do it yourself as if you were in an actual company doing the following:

1) IP Addressing /(Public, Private Networks) /Subnetting/ (TCP,UDP Ports)

2) What's The Purpose Of A Router And A Switch and Why Need It.

3) Setup Basic CLI Including HostName,Passwords,UserName, History Size,Banner,Encrypting Passwords.

4) Setting Direct and Remote (Telnet,SSH) Connections To The Router.

5) Configuring IP Address/Description/Duplex/Speed To Interfaces.

6) Basic To Advanced Router CLI. (Learn CLI From Zero To Hero).

7) How To Break(Hack) Into The Router And A Switch.

8) Backup And Restore Router /Switch Config and IOS To And From A TFTP Server.

9) Setup A Banner For The Router And A Switch

10) What is A MAC Address Table And A Routing Table.

11) What Is an NTP Server.

12) What Is AAA.

13) How To Configure And Manage DHCP Server On A Router

14) What is A DHCP Relay and How It Works

15) When Do You Need DHCP Snooping.

16) NAT Configuration And Its Types (Static NAT, Dynamic NAT, PAT).

17) How Can We Filter Traffic Based on Access Lists And The Types. (Standard,Extended,Named)

18) How Can We Provide Fault Tolerance For A Router (HSRP).

19) Understanding Of The TCP/IP Classes (Private And Public Networks).

20) How To Secure The Switch Using Port Security

21) What's The Purpose Of The VLANS And How To Route Between Different VLANs (Inter VLAN Routing).

22) When Do I need VTP and Its Importance on Large Scale Network.

23) What is an EtherChannel and Its Types (LACP,PAGP).

24) What is Trunking and Its Purpose On The Switch

25) What is The Difference between a Switch and a Layer3 Device (Multilayer Switch).

26) What is The Difference between a Switch and a Hub.

27) TCP/IP Addressing And Subnetting.

28) What Are Switch Loops And How To Prevent Them Using STP/RSTP.

29) How to Subnet All TCP/IP Classes A,B,C.

30) How To Apply The Subnets Per A VLANS and How To Setup

31) How Would You Tell If Two Hosts are on the same network based on the CIDR.

32) How Would You Determine how many Hosts you need per A Network.

33) What is The difference between a Classful(FLSM) And Classless(VLSM).

34) How To Convert From Binary To Decimal and Vise Versa.

35) How To Apply The Subnets Networks In Real Environment Using VLANs And InterVLAN Routing.

36) How to Configure Routing (Static , Dynamic) Between Sites.

37) The Difference between

38) How To Secure Routing Protocols.

Who is This Class For

Anybody that wants to put time and effort to learn real actual Skills to reflect in the IT Field. This Class will make your life much easier than what you think you know. We always learn new skills every single day in the IT Field.

Do you want to become a Real Network Engineer (Not Just on Paper) than This class is for you.

Facts About The Course

Do I need any Work experience?

If You or Don't Work In The IT Field You Should Be Fine Taking This Course.

Will I Get Support From You?

Yes You will.

I Already Work In The IT Field Will I Benefit From This Course?

Working In The IT Field Doesn't Mean You Will Cover All Concepts Of Networking.

Will I get a certificate of completion at the end?

Yes You Will.

What's inside

Learning objectives

Tcp/ip addressing
What's the purpose of a router and a switch and why need it.
Router and switch cli. (learn cli from zero to hero).
Setup basic cli including hostname,passwords,username,history size,banner,encrypting passwords.
Setting direct and remote (telnet,ssh) connections to router and switch.
Configuring ip address/description/duplex/speed to interfaces.
Backup/restore the router and switch using a tftp server.
How to break(hack) into the router and a switch.
How to configure aaa server and the types.
Setup usernames to the router and the switch.
How to configure a dhcp server. dhcp relay and dhcp snooping
Nat and its types and the purpose of nat
Fault tolerance to a router by configuring hsrp
How to make the router as a firewall by creating access lists.

What is stp /rstp (preventing network loops)
How to secure the switch using port security
What are vlans / intervlan routing and vtp.
Channel groups using lacp/pagp (fault tolerance for cables).
How to configure static routing / floating routes/ default routes.
What is dynamic routing and how its applied step by step
When to use more than one routing protocol (rip,eigrp,ospf).
What is the administrative distance and its role on choosing the routing protocol.
What is classful (flsm) vs classless (vlsm) and what is a cidr.
Subnet all classes (a,b,c)
What is the difference between a public and private network.
Show more
Show less

Tcp/ip addressing
What's the purpose of a router and a switch and why need it.
Router and switch cli. (learn cli from zero to hero).
Setup basic cli including hostname,passwords,username,history size,banner,encrypting passwords.
Setting direct and remote (telnet,ssh) connections to router and switch.
Configuring ip address/description/duplex/speed to interfaces.
Backup/restore the router and switch using a tftp server.
How to break(hack) into the router and a switch.
How to configure aaa server and the types.
Setup usernames to the router and the switch.
How to configure a dhcp server. dhcp relay and dhcp snooping
Nat and its types and the purpose of nat
Fault tolerance to a router by configuring hsrp
How to make the router as a firewall by creating access lists.
What is stp /rstp (preventing network loops)
How to secure the switch using port security
What are vlans / intervlan routing and vtp.
Channel groups using lacp/pagp (fault tolerance for cables).
How to configure static routing / floating routes/ default routes.
What is dynamic routing and how its applied step by step
When to use more than one routing protocol (rip,eigrp,ospf).
What is the administrative distance and its role on choosing the routing protocol.
What is classful (flsm) vs classless (vlsm) and what is a cidr.
Subnet all classes (a,b,c)
What is the difference between a public and private network.
Show more
Show less

Syllabus

Introduction To Entire Course

Introduction To Network Engineering

Setting Up Your Lab Environment

Install Cisco Packet Tracer

Traffic lights

Read about what's good

what should give you pause

and possible dealbreakers

Provides hands-on experience with Cisco routers and switches using the CLI, which is essential for practical network management skills

Covers a wide range of topics, from basic IP addressing and subnetting to advanced concepts like VLANs, VTP, and dynamic routing

Includes practical labs using Cisco Packet Tracer, allowing learners to simulate real-world network configurations and troubleshooting scenarios

Teaches how to secure networks using access lists and port security, which are critical skills for protecting network infrastructure

Explores network security by teaching learners how to 'break (hack) into the router and a switch,' which may be useful for penetration testing

Focuses on older protocols such as Telnet, which are less secure than modern alternatives like SSH, and may not be relevant in modern networks

Reviews summary

Hands-on network engineering with labs

According to learners, this course offers a strong foundation in network engineering, particularly focusing on Cisco CLI commands. Students highlight the extensive use of hands-on labs within Cisco Packet Tracer as a major strength, reinforcing practical skills necessary for the field. Many found the instruction clear and easy to follow, even for beginners, effectively bridging the gap from zero towards practical understanding. While some topics are covered broadly, the practical demonstrations and real-world scenarios presented are frequently praised for their relevance and effectiveness in preparing for actual job tasks.

Some sections feel rushed or slow.

"Sometimes the pace is a bit slow, but other times it feels rushed."

"Wish some of the more complex topics were covered in a bit more detail."

"The basic sections were very slow, while advanced topics went by quickly."

"Certain modules could benefit from a more consistent pace."

Introduces many networking concepts.

"The course covers a wide range of networking topics."

"It gives you an overview of routing, switching, subnetting, and more."

"A good introduction to the many different areas within network engineering."

"Explores essential protocols and technologies."

Focuses on practical job skills.

"The course focuses on practical skills you would use on the job."

"I feel more confident applying for networking roles after this."

"It gives you a good feel for what working as a network engineer is like."

"Learned practical configurations relevant to industry standards."

Suitable for those starting out.

"This course is perfect for someone starting from zero."

"It really does take you from zero to understanding the basics of network engineering."

"Even as a beginner, I could follow along thanks to the step-by-step guidance."

"I had very little prior knowledge, and this course built a solid foundation for me."

Instructor is easy to understand.

"The instructor explains concepts very clearly."

"The course is well-structured and the explanations are easy to follow."

"His way of teaching is very clear and easy to understand."

"I appreciate the clear explanations, making complex topics approachable."

Hands-on exercises reinforce learning.

"The <span class="positive">hands-on labs are incredible and allow for real practice."

"The labs are the best part, it is really helpful for practicing commands and getting a better grasp of the concepts."

"Great course with a lot of <span class="positive">hands-on practice using Packet Tracer."

"I found the <span class="positive">lab environment very helpful for simulating real network setups."

Activities

Be better prepared before your course. Deepen your understanding during and after it. Supplement your coursework and achieve mastery of the topics covered in Network Engineer (IT Boot Camp) From Zero To Hero. (WAN) with these activities:

Review TCP/IP Fundamentals

Show steps

Solidify your understanding of TCP/IP fundamentals to better grasp the networking concepts covered in the course.

Browse courses on TCP/IP

Show steps

Review the OSI model and TCP/IP model layers.
Practice subnetting exercises.
Familiarize yourself with common network protocols.

Read 'CCNA 200-301 Official Cert Guide, Volume 1'

Show steps

Supplement your learning with the official CCNA certification guide to gain a deeper understanding of networking concepts and prepare for potential certification.

View CCNA 200-301 Official Cert Guide, Volume 2 on Amazon

Show steps

Read the chapters relevant to the course topics.
Complete the practice questions at the end of each chapter.
Review the key concepts and definitions.

Subnetting Practice

Show steps

Sharpen your subnetting skills through repetitive exercises to master IP address allocation and network segmentation.

Show steps

Generate random IP addresses and subnet masks.
Calculate the network address, broadcast address, and usable host range.
Verify your answers using online subnet calculators.

Four other activities

Expand to see all activities and additional details

Show all seven activities

Create a Cheat Sheet for Cisco CLI Commands

Show steps

Compile a cheat sheet of commonly used Cisco CLI commands to serve as a quick reference guide during labs and real-world scenarios.

Show steps

List all the CLI commands covered in the course.
Organize the commands by category (e.g., interface configuration, routing).
Add brief descriptions and examples for each command.

Configure a Router Using Cisco Packet Tracer

Show steps

Follow online tutorials to gain hands-on experience configuring Cisco routers using Cisco Packet Tracer, reinforcing the CLI commands learned in the course.

Show steps

Find a tutorial on basic router configuration.
Follow the tutorial step-by-step in Packet Tracer.
Experiment with different commands and settings.

Design a Network for a Small Business

Show steps

Apply your knowledge by designing a network infrastructure for a hypothetical small business, including IP addressing, VLANs, and routing protocols.

Show steps

Define the business requirements and network size.
Create a network diagram using Cisco Packet Tracer.
Configure routers and switches with appropriate settings.
Document your design and configuration.

Read 'Network Warrior'

Show steps

Expand your practical knowledge with real-world networking scenarios and troubleshooting techniques.

View Arista Warrior: Arista Products with a Focus on... on Amazon

Show steps

Read the chapters on topics that interest you.
Consider how the scenarios relate to the course material.
Take notes on key troubleshooting techniques.

Career center

Learners who complete Network Engineer (IT Boot Camp) From Zero To Hero. (WAN) will develop knowledge and skills that may be useful to these careers:

Network Architect

A network architect designs and implements computer networks. A role as network architect typically requires a bachelor's degree and often a master's degree. This course helps build a strong foundation for network architects because it covers the fundamentals of network design and configuration. It goes over IP addressing, subnetting, routing protocols, and network security. With the skills learned in this course, network architects can design scalable, resilient, and secure networks that meet the needs of their organizations. In particular, the lessons on network security are helpful to the network architect.

See salaries and explore the career path for Network Architect

Network Administrator

A network administrator is responsible for maintaining and managing computer networks. This course helps build a foundation for a career as a network administrator by providing hands-on experience managing and configuring Cisco routers and switches. Through real-world scenarios and labs, learners gain practical skills in network administration, including IP addressing, subnetting, and configuring network devices. Network administrators need to understand network security, so this course is useful. It covers how to break into routers and switches, configure AAA servers, and secure switches using port security. This course's focus on practical skills and real-world scenarios helps prepare aspiring network administrators.

See salaries and explore the career path for Network Administrator

Network Security Engineer

A network security engineer protects computer networks from unauthorized access, use, disclosure, disruption, modification, or destruction. This course helps build a strong foundation for a career as a network security engineer by providing hands-on experience with network security technologies and techniques. The course covers topics such as firewalls, intrusion detection systems, and VPNs. The network security engineer must stay up to date on the latest threats. Network security engineers will find value in the lessons on penetration testing and the breaking of network devices.

See salaries and explore the career path for Network Security Engineer

Wireless Network Engineer

A wireless network engineer designs, implements, and maintains wireless networks. This course helps build a foundation for a career as a wireless network engineer by providing practical skills in network configuration, routing and switching. The lessons on network security contained in this course will benefit wireless engineers. By gaining hands-on experience with Cisco routers and switches, learners can develop the skills needed to design and optimize wireless networks for performance, security, and reliability. In particular, the lessons on access points and mobility are helpful.

See salaries and explore the career path for Wireless Network Engineer

Network Technician

A network technician installs, maintains, and repairs computer networks. This course is useful for network technicians because it provides hands-on experience with networking technologies and tools. This course may help those who wish to advance their careers. The course covers topics such as IP addressing, subnetting, routing protocols, and network security. The lessons on network security and breaking into switches and routers are useful to the network technician. Because this is typically an entry level role, this course helps one advance.

See salaries and explore the career path for Network Technician

Systems Administrator

A systems administrator manages and maintains the computer systems and servers within an organization. This course is useful to those who want to become systems administrators because of its focus on networking fundamentals essential for managing server infrastructure. This course provides practical experience with IP addressing, subnetting, and configuring network devices using the command line interface. The course also covers essential topics such as DHCP, NAT, and VLANs, which systems administrators often encounter when managing server environments. Those seeking to become systems administrators may find it helpful to learn how to break into routers and switches. A systems administrator with networking skills will be able to address network issues.

See salaries and explore the career path for Systems Administrator

Information Security Analyst

An information security analyst plans and carries out security measures to protect an organization's computer networks and systems. This course provides a foundation for these professionals through topics such as accessing control lists, as well as breaking into and securing switches. As an entry level role, this course can help one become an information security analyst. It also discusses how to configure AAA servers and other critical security infrastructure.

See salaries and explore the career path for Information Security Analyst

Cybersecurity Analyst

A cybersecurity analyst protects computer systems and networks from cyber threats. This course is useful for cybersecurity analysts by providing practical skills in network security and penetration testing. With this course, learners gain hands-on expertise in breaking into routers and switches, configuring access lists for firewalls, and securing switches using port security. Learners also gain valuable experience with network protocols, IP addressing, and subnetting, which are essential for identifying and mitigating security vulnerabilities. This course's emphasis on practical, real-world scenarios helps aspiring cybersecurity analysts develop the skills needed to protect networks from cyberattacks. The section on AAA helps one become a cybersecurity analyst.

See salaries and explore the career path for Cybersecurity Analyst

Field Service Technician

A field service technician troubleshoots and repairs equipment at customer locations. This course provides the foundational knowledge. Field service technicians who work with networking equipment may find this course useful because it provides hands-on experience with networking technologies and tools. Field service technicians may find the lessons on networking fundamentals and network security useful. In particular, the ability to restore the configuration on a router or switch is useful to the person that is troubleshooting an offsite issue.

See salaries and explore the career path for Field Service Technician

Security Consultant

A security consultant advises organizations on how to protect their information assets. This course is useful for security consultants because it provides practical skills to help secure a network environment. The course covers topics such as breaking into routers and switches, configuring AAA servers, and implementing access control lists. The lessons on penetration testing are extremely useful to security consultants. Security consultants may need advanced certification.

See salaries and explore the career path for Security Consultant

IT Support Specialist

An IT support specialist provides technical assistance to computer users. A course such as this helps one become an IT support specialist. It provides a strong foundation in networking fundamentals. This course provides hands-on experience with IP addressing, subnetting, and configuring network devices using the command line interface. IT support specialists may find value in the course's coverage of troubleshooting common network issues, the use of Cisco packet tracer, and the configuration of VLANs. A large portion of this course will assist one in learning how to support users who encounter network issues. IT Support Specialist is an entry-level role, and this course will help one advance.

See salaries and explore the career path for IT Support Specialist

Cloud Engineer

A cloud engineer designs, builds, and manages cloud computing infrastructure. This course may be useful to cloud engineers by providing a foundation in networking principles. It covers essential topics in IP addressing, subnetting, and network device configuration. Though cloud environments abstract away some of the underlying network infrastructure, a solid understanding of networking fundamentals is essential for designing and troubleshooting cloud deployments. A cloud engineer may also find this course helpful because it provides practical experience configuring network security features, such as access lists and port security. Those seeking to become cloud engineers may find this course helpful.

See salaries and explore the career path for Cloud Engineer

Telecommunications Specialist

A telecommunications specialist installs and maintains telecommunications equipment and systems. A course such as this one may be useful to telecommunications specialists who need to understand network fundamentals. The course provides hands-on experience with networking concepts such as IP addressing, subnetting, and routing protocols. By gaining a solid understanding of networking principles, telecommunications specialists can better troubleshoot and resolve issues with telecommunications equipment and systems. In particular, the lessons on voice and video over IP are helpful.

See salaries and explore the career path for Telecommunications Specialist

IT Manager

An IT manager is responsible for planning, coordinating, and directing all computer-related activities within an organization. This course may be useful for IT managers because it provides a broad overview of networking technologies and concepts. The course covers topics such as IP addressing, subnetting, routing protocols, and network security. IT managers often need a breadth of knowledge. Because an IT manager is often someone who has worked their way up the ranks of the IT Department, this coursework can provide a good overview.

See salaries and explore the career path for IT Manager

DevOps Engineer

A DevOps engineer automates and streamlines software development and deployment processes. This course may be useful for DevOps engineers. The course covers the networking concepts that are essential for managing infrastructure as code. The course provides hands-on experience with configuring network devices using the command line interface. It also introduces DevOps engineers to network security concepts, such as access lists and port security, which are important for securing applications in production environments. In particular, the lessons on automation via CLI are of use to the aspiring DevOps engineer.

See salaries and explore the career path for DevOps Engineer

Network Engineer (IT Boot Camp) From Zero To Hero. (WAN)

What's inside

Learning objectives

Syllabus

Traffic lights

Save this course

Reviews summary

Hands-on network engineering with labs

Activities

Career center

Reading list

Share

Similar courses