We may earn an affiliate commission when you visit our partners.
Sami D
Make sure you know Reinforced Concrete Theory and How to design Reinforced Concrete beams before taking this course.
about the course:
Read more
Make sure you know Reinforced Concrete Theory and How to design Reinforced Concrete beams before taking this course.
about the course:
Read more
Make sure you know Reinforced Concrete Theory and How to design Reinforced Concrete beams before taking this course.
about the course:
In the previous course, you have been introduced to the philosophy of Reinforced Concrete Design. This course 'Design of Reinforced Concrete Slab' gives you detailed understanding, explanations and procedures for the design of RC Slabs.
What to expect from this course:
After completion of this course, you are expected to be able to design the two types of RC Beams: Joist Slab System, and Solid Slab System.
What are exactly the points covered in this course:
This course focuses on the following concepts:
- Philosophy and Design of Solid Slab System
- Philosophy and Design of Joist Slab System
Students completing the course will have full understanding of the design of Solid Slab System and Joist Slab System. In addition, students will be able to design these slabs given the service loads. Quizzes will be added on demand.
Register for this course and see more details by visiting:
OpenCourser.com/course/dc65k5/reinforced
13 deals to help you save
We found 13 deals and offers that may be relevant to this course.
Save money when you learn.
All coupon codes, vouchers, and discounts are applied automatically unless otherwise noted.
Use code at checkout.
Valid until December 3
Cyber Monday
Develop career-changing skills with these steeply discounted courses.
Up to
85%
off
BFCMSALE24
Use code at checkout.
Only 18 hours left!
Black Friday
Develop career-changing skills with these steeply discounted courses.
Up to
85%
off
BFCMSALE24
Use code at checkout.
Valid until December 1
For new customers
Save when you purchase top courses. For new customers only.
Special Offer
UDEAFNULP2024
What's inside
Learning objectives
- Design solid slabs and understand the philosophy of design
- Design joist (ribbed) slabs and understand the philosophy of design
- Review of t-beams design
- Design solid slabs and understand the philosophy of design
- Design joist (ribbed) slabs and understand the philosophy of design
- Review of t-beams design
Syllabus
Introduction
This is an introduction to the whole concrete series. If you have not
taken the first course, I advise you to take it. This course is about
detailed design of RC Slabs.
Read more
Syllabus
Introduction
This is an introduction to the whole concrete series. If you have not
taken the first course, I advise you to take it. This course is about
detailed design of RC Slabs.
Read more
Understand and Design Solid Slab System
Discuss procedure and philosophy of designing Solid Slab.
Discuss procedure and philosophy of designing Solid Slab.
Design example on Solid Slab System
Understand and Design Joist Slab System
Joist System Design Philosophy
Joist System Design Philosophy
Introducing design example. Please check the PDF for step by step solution.
Check if you have understood the philosophy of design of RC Slabs
In the next exercises, you will test your understanding of the philosophy of Reinforced Concrete Slab Design.
Discover my other courses and get discounts !
Good to know
Good to know
Know what's good ,
what to watch for , and
possible dealbreakers
Designers looking to strengthen their existing understanding of Reinforced Concrete Slab Design may find this course helpful
The course relies on learners having working knowledge of Reinforced Concrete Theory and how to design beams
Students may need to purchase additional materials to take this course, such as a PDF
Provides hands-on understanding and detailed procedures for RC Slabs
Save this course
Save Reinforced Concrete III: Design of Slabs to your list so you can find it easily later:
Save
Save
Reviews summary
Valuable course on concrete slab design
Learners say this course on reinforced concrete slab design is engaging and valuable. Students are learning how to design slabs from expert instructors and through assignments.
Activities
Be better prepared
before
your course. Deepen your understanding
during
and
after
it. Supplement your coursework and achieve mastery of the topics covered
in Reinforced Concrete III: Design of Slabs with these
activities:
Review the basics of structural analysis
Show steps
Prepare for this course by reviewing the basics of structural analysis.
Browse courses on
Structural Analysis
Show steps
-
Review your notes from a previous course or textbook.
-
Work through some practice problems.
Join a study group or online forum for RC slab design
Show steps
Engage with your peers and learn from their perspectives on RC slab design.
Show steps
-
Find a study group or online forum that aligns with your learning goals.
-
Actively participate in discussions and share your knowledge.
-
Seek feedback on your understanding of concepts.
Solve practice problems on RC slab design
Show steps
Reinforce your understanding of RC slab design by solving practice problems.
Show steps
-
Download practice problems from the course website or other sources.
-
Set aside time to work through the problems.
-
Check your answers against the provided solutions.
Four other activities
Expand to see all activities and additional details
Show all seven activities
Design a simple RC slab
Show steps
Apply the concepts learned in the course by designing a simple RC slab.
Show steps
-
Choose a specific type of RC slab (solid or joist).
-
Read course materials and research relevant design codes and standards.
-
Calculate loads and determine the required dimensions.
-
Create detailed drawings or sketches of the slab design.
Connect with a professional who has experience in RC slab design
Show steps
Gain valuable insights and guidance by connecting with a mentor in the field of RC slab design.
Show steps
-
Reach out to professionals in your network.
-
Attend industry events and conferences.
-
Utilize online platforms like LinkedIn to connect with potential mentors.
Write a summary of the key concepts of RC slab design
Show steps
Solidify your understanding of RC slab design by writing a summary of the key concepts.
Browse courses on
Reinforced Concrete Design
Show steps
-
Identify the main topics covered in the course.
-
Write a brief summary of each topic.
-
Proofread your summary and make any necessary revisions.
Design a simple RC slab
Show steps
Apply your knowledge of RC slab design to a practical project.
Browse courses on
Reinforced Concrete Design
Show steps
-
Choose a simple slab design to work on.
-
Calculate the loads and moments acting on the slab.
-
Design the reinforcement for the slab.
-
Draw the design details of the slab.
Review the basics of structural analysis
Show steps
Prepare for this course by reviewing the basics of structural analysis.
Browse courses on
Structural Analysis
Show steps
Show steps
Show steps
- Review your notes from a previous course or textbook.
- Work through some practice problems.
Join a study group or online forum for RC slab design
Show steps
Engage with your peers and learn from their perspectives on RC slab design.
Show steps
Show steps
Show steps
- Find a study group or online forum that aligns with your learning goals.
- Actively participate in discussions and share your knowledge.
- Seek feedback on your understanding of concepts.
Solve practice problems on RC slab design
Show steps
Reinforce your understanding of RC slab design by solving practice problems.
Show steps
Show steps
Show steps
- Download practice problems from the course website or other sources.
- Set aside time to work through the problems.
- Check your answers against the provided solutions.
Four other activities
Expand to see all activities and additional details
Show all seven activities
Design a simple RC slab
Show steps
Apply the concepts learned in the course by designing a simple RC slab.
Show steps
Show steps
Show steps
- Choose a specific type of RC slab (solid or joist).
- Read course materials and research relevant design codes and standards.
- Calculate loads and determine the required dimensions.
- Create detailed drawings or sketches of the slab design.
Connect with a professional who has experience in RC slab design
Show steps
Gain valuable insights and guidance by connecting with a mentor in the field of RC slab design.
Show steps
Show steps
Show steps
- Reach out to professionals in your network.
- Attend industry events and conferences.
- Utilize online platforms like LinkedIn to connect with potential mentors.
Write a summary of the key concepts of RC slab design
Show steps
Solidify your understanding of RC slab design by writing a summary of the key concepts.
Browse courses on
Reinforced Concrete Design
Show steps
Show steps
Show steps
- Identify the main topics covered in the course.
- Write a brief summary of each topic.
- Proofread your summary and make any necessary revisions.
Design a simple RC slab
Show steps
Apply your knowledge of RC slab design to a practical project.
Browse courses on
Reinforced Concrete Design
Show steps
Show steps
Show steps
- Choose a simple slab design to work on.
- Calculate the loads and moments acting on the slab.
- Design the reinforcement for the slab.
- Draw the design details of the slab.
Career center
Learners who complete Reinforced Concrete III: Design of Slabs will develop knowledge and skills
that may be useful to these careers:
Structural Engineer
Structural Engineer
Structural Engineers design and analyze the structural components of buildings and other structures. This course can help Structural Engineers be more effective by allowing them to design solid and joist slab systems. Engineering at this level requires a Master's Degree and extensive experience.
Structural Designer
Structural Designer
Structural Designers determine the size, shape, and other parameters for structural beams, slabs, columns, and foundations. This course can help Structural Designers be more effective by allowing them to design solid and joist slab systems. Engineering at this level requires a Bachelor's Degree and extensive experience.
Structural Analyst
Structural Analyst
Structural Analysts help determine the structural integrity of buildings and other structures. This course can help Structural Analysts be more effective by allowing them to design solid and joist slab systems. Engineering at this level requires a Bachelor's Degree and extensive experience.
Civil Engineer
Civil Engineer
Civil Engineers work on the planning and construction of different structures. This course can help Civil Engineers be more effective by allowing them to design solid and joist slab systems. Engineering at this level requires a Bachelor's Degree and often a Master's Degree and extensive experience.
Construction Manager
Construction Manager
Construction Managers supervise and coordinate construction projects. This course may be useful for Construction Managers who wish to oversee the implementation of slab systems.
Estimator
Estimator
Estimators calculate the cost of construction projects. This course may be useful for Estimators who wish to specialize in the estimation of costs for buildings that use slab systems.
Building Inspector
Building Inspector
Building Inspectors ensure that buildings and other structures comply with building codes and regulations. This course may be useful for Building Inspectors who wish to specialize in the inspection of buildings that use slab systems.
Building Contractor
Building Contractor
Building Contractors oversee the construction of buildings and other structures. This course may be useful for Building Contractors who wish to specialize in the construction of buildings that use slab systems.
Structural Detailer
Structural Detailer
Structural Detailers prepare detailed drawings of structural components for use in construction. This course may be useful for Structural Detailers who wish to specialize in the detailing of slab systems.
Construction Superintendent
Construction Superintendent
Construction Superintendents oversee the day-to-day operations of construction projects. This course may be useful for Construction Superintendents who wish to specialize in the supervision of projects that use slab systems.
Project Engineer
Project Engineer
Project Engineers oversee civil engineering projects. This course may be useful for Project Engineers involved with projects that include slab systems.
Architect
Architect
Architects design buildings and other structures. This course may be useful for Architects who wish to specialize in the design of buildings that use slab systems.
Architectural Engineer
Architectural Engineer
Architectural Engineers design and construct buildings and other structures. This course may be useful for Architectural Engineers who wish to specialize in the design of buildings that use slab systems.
Engineering Manager
Engineering Manager
Engineering Managers oversee engineering projects and teams. This course may be useful for Engineering Managers who wish to specialize in the management of projects that include slab systems.
Project Manager
Project Manager
Project Managers oversee the planning, execution, and completion of construction projects. This course may be useful for Project Managers who wish to specialize in the management of projects that use slab systems.
For more career information including salaries, visit:
OpenCourser.com/course/dc65k5/reinforced
Reading list
We've selected eight books
that we think will supplement your
learning. Use these to
develop background knowledge, enrich your coursework, and gain a
deeper understanding of the topics covered in
Reinforced Concrete III: Design of Slabs.
Serves as a valuable reference tool for reinforced concrete design, providing code provisions and design examples.
Provides a comprehensive overview of reinforced concrete design, covering the latest ACI 318-19 code requirements.
Offers an in-depth treatment of prestressed concrete design, including the latest ACI 318-19 code requirements.
Save
Provides a comprehensive overview of structural concrete design, including the latest ACI 318-19 code requirements.
Provides an introduction to reinforced concrete design with a mathematical approach, enabling readers to make practical applications.
Save
Provides a comprehensive guide to the analysis and design of tall buildings, including reinforced concrete structures.
Offers a detailed examination of the stresses and deformations in concrete structures, providing a solid foundation for design.
Offers a clear and concise introduction to reinforced concrete design, suitable for beginners.
For more information about how these books relate to this course, visit:
OpenCourser.com/course/dc65k5/reinforced
Share
Similar courses
Here are nine courses similar to
Reinforced Concrete III: Design of Slabs.
Reinforced Concrete II: Design of Beams
OpenCourser.com/course/rvajwl/reinforced
Reinforced Concrete II: Design of Beams
Most relevant
Design and Detailing of RCC elements
OpenCourser.com/course/uggxx8/design
Design and Detailing of RCC elements
Most relevant
Robot structural analysis - for BIM projects
OpenCourser.com/course/xf8zfs/robot
Robot structural analysis - for BIM projects
Most relevant
Structural scheme setting and ETABS Analysis of RCC Building
OpenCourser.com/course/okql4a/structural
Structural scheme setting and ETABS Analysis of RCC...
Most relevant
Master Reinforced Concrete structures designs
OpenCourser.com/course/2dw9d6/master
Master Reinforced Concrete structures designs
Most relevant
Reinforced Concrete Design I
OpenCourser.com/course/ohz1fi/reinforced
Reinforced Concrete Design I
Most relevant
Formwork Systems
OpenCourser.com/course/rb9y4e/formwork
Formwork Systems
Design Basics of Steel Buildings
OpenCourser.com/course/lwjfo7/design
Design Basics of Steel Buildings
Introduction to Systems Engineering
OpenCourser.com/course/j4d5ix/introduction
Introduction to Systems Engineering
Effort
1 total hour
Via
Udemy
Instructor
Sami D
Language
English
Good to know
Designers looking to strengthen their existing understanding of Reinforced Concrete Slab Design may find this course helpful
The course relies on learners having working knowledge of Reinforced Concrete Theory and how to design beams
Students may need to purchase additional materials to take this course, such as a PDF
Provides hands-on understanding and detailed procedures for RC Slabs
Our mission
OpenCourser helps millions of learners each year. People visit us to learn workspace skills, ace their exams, and nurture their curiosity.
Our extensive catalog contains over 50,000 courses and twice as many books. Browse by search, by topic, or even by career interests. We'll match you to the right resources quickly.
Find this site helpful? Tell a friend about us.
Affiliate disclosure
We're supported by our community of learners. When you purchase or subscribe to courses and programs or purchase books, we may earn a commission from our partners.
Your purchases help us maintain our catalog and keep our servers humming without ads.
Thank you for supporting OpenCourser.
© 2016 - 2024 OpenCourser